Cara biar firefox prosesnya tidak banyak

 In Firefox 68+ you can only disable multi-process by creating an environment variable named MOZ_FORCE_DISABLE_E10S and set its value to 1. You can either use a .cmd file to start Firefox or set this variable in the Windows Control Panel -> System.

 

di windows xp ada di system - advanced - environment variables - system variables

Trik ini hanya berlaku hingga versi 80.0.1 . Versi selanjutnya sudah tidak mendukung. 

Untuk mencegah update, file maintenance dan update exe perlu dihapus.

cara menambahkan driver di installer USB untuk windows 7

caranya:

http://codeabitwiser.com/2014/03/how-to-install-windows-7-with-only-usb-3-0-ports/

https://www.msigeek.com/2635/unmount-and-clean-up-a-wim-image-using-deployment-image-servicing-and-management-dism

https://www.sevenforums.com/installation-setup/397606-create-windows-7-usb-flash-installation-new-drives-new-mbs.html

butuh dism yang ada di windows 7. Kalau tidak punya bisa download di :
https://www.microsoft.com/en-us/download/details.aspx?id=5753

Cara membuat video menjadi hitam putih dengan ffmpeg

 Gunakan perintah:

ffmpeg -i input -vf hue=s=0 output

ffmpeg -i input -vf format=gray output

ffmpeg -i video.avi -filter_complex 'extractplanes=y[y]' -map '[y]' y.avi 

Penjelasan, diambil hanya bagian hitam putihnya saja dari YUVnya
ffmpeg -i video.avi -filter_complex 'extractplanes=y+u+v[y][u][v]' -map '[y]' y.avi -map '[u]' u.avi -map '[v]' v.avi

Memaksa agar fsck check disk dijalankan saat boot

 Jalankan perintah sebagai root

touch /forcefsck

Solusi pesan yang selalu muncul saat boot: Your hardware settings have changed

 Pada komputer dengan VGA card AMD kadang muncul pesan berikut yang selalu muncul saat booting:

System settings change: Your hardware settings have changed. Please reboot your computer for these changes to take effect.

Masalah terjadi karena program bawaan AMD. Solusinya adalah dengan men-disable service AMD external Events Utility melalui service di Administrative tools

Cara tambah printer tanpa harus authorisasi di ubuntu

You need to change a file as shown below, but before type

sudo service cups stop

/etc/cups/printers.conf is the one you need. Underneath the printer

# Printer configuration file for ...
# Written by cupsd on ...
<DefaultPrinter canon>
AuthInfoRequired username,password
Info Canon ...
...

The AuthInfoRequired is the one you need. Add it to the printer you need it for if it is not there.

Type

sudo nano /etc/cups/printers.conf 

Make the changes : replace "AuthInfoRequired none" with "AuthInfoRequired username,password" type [ctrl] [X] then [Y] then [enter] to exit, save and finaly confirm location.

Then type

sudo service cups start

and print as usual, just type your user credential and hit save when asked if you want ubuntu to store them.

 

I was able to fix the problem, though I don't quote know why it arose. In the file /etc/cups/printers.conf the authorization for the printer was set to:

AuthInfoRequired none

I changed this to:

AuthInfoRequired username,password

And it now prompts me to enter my credentials when I print something, and it prints without issue.

 

 

Re: Networked printer "Authentication Required"

I got rid of the "Authentication Required to Print" dialog by directly editing the file, "/etc/cups/printers.conf", as follows:

Step 1. Open a terminal window:

[Applications|Accessories|Terminal]

(In the lines below, '$' is the prompt character. Type what comes after it.)

Step 2. Stop the cups server:

$ sudo service cups stop

Step 3. Edit the printers.conf file. I use 'vim' for text editing; you can use whatever editor you like. 'gedit' comes standard with Ubuntu:

$ sudo vim /etc/cups/printers.conf 

Near the top of file "/etc/cups/printers.conf" is a line:

AuthInfoRequired username,password

Insert a "#" char in the first column (or, just delete the line):

#AuthInfoRequired username,password

Step 4. Save edited file
Step 5. Restart cups server:

$ sudo service cups start

This should fix the problem. I ran thru the printer config dialog after this change, and it did not change the line back. It seems there is no way to change it except by directly editing the printers.conf file.

I only have one printer, but you may have to repeat for other printers listed in "/etc/cups/printers.conf".

Last edited by manthony121; August 15th, 2010 at 05:15 PM. Reason: Make directions more explicit

 

 

 

Viewed 35k times

 

 

8

I have to print through a Samba server sharing an HP printer. After upgrading to 12.04 I'm no longer able to get it to work.

The printer is shared through a samba server and I need to provide logon info (domain, username and password).

The machine that I'm having trouble with is a fresh install of Ubuntu 12.04 64 bit. As a measure to troubleshoot, I created a fresh install of ubuntu 10.04 32 bit as a virtual box image on the Ubuntu 12.04 64 bit machine and had no trouble getting it to print.

I suspect authentication to be the problem. Any idea as to what is wrong? Any suggestions how to make further troubleshooting? Any information I should provide to enable you to help me?

EDIT: To be more specific, when I want to add a network printer I do this through the GUI and when I need to input credentials it will not verify me (although this works fine on the virtual box).

 Print dialog. As username I input domain/username.

If I choose "Prompt user if authentication is required" and then press verify it prompts me for credentials(username, domain and password). If I input username as: domain/username, let domain be empty and supply a password it is able to verify everything. This is the only way that I have made it to verify credentials on Ubuntu 12.04. This however doesn't make me able to print.

12.04networkingprintingsambaauthentication

share  improve this question   

edited Aug 3 '12 at 14:32

Bill the Lizard

40177 silver badges1414 bronze badges

asked Jun 20 '12 at 10:39

thomas

21111 gold badge33 silver badges88 bronze badges

add a comment

5 Answers

ActiveOldestVotes

11

I just tried setting up a printer in Ubuntu 12.04 in a similar situation. I want to access printers on a Windows server in a domain. Wasn't working - they were being held for authentication too. My local username on the Ubuntu box is not the same as my Active Directory domain username. (I may be Samba not perfectly set up.) Best solution so far for me:

1. Choose Add new printer in Printing, click open 'Network Printers', select 'Windows Printer via SAMBA'

2. Click 'Browse' to browse for printer (it prompts for authentication to access Windows server with printer)

3. Select the correct printer or enter URI.

4. URI for new printer in New Printer dialog is now 'smb://servername/printername'

5. Select 'Set authentication details now'

6. Enter details as 'domain\username' and password (if I click 'verify' now it says printer is not accessible, but I clicked Forward anyway.)

7. Select driver

8. Print test page

Success!

If I chose 'Prompt user if authentication is required' instead of 'Set authentication details now', then the "verify" button reports that the printer is accessible. (This is one of the first things I tried.) But the jobs get held for authentication. I deleted that printer and tried the steps above, ignoring the verify button, and things now seem to work. Perhaps the Verify button doesn't handle usernames of 'domain\username' format, or perhaps I need to have the correct domain name set in my Samba settings in smb.conf.

share  improve this answer   

edited Aug 3 '12 at 14:54

answered Aug 3 '12 at 14:48

RobDavenport

37111 silver badge66 bronze badges

add a comment

1

Try adding the printer without credentials, and then open the list of print jobs after initiating them. Now each job should have the status "Awaiting approval" or similar (My system is Danish), right click, and chose to approve the job. When entering your credentials, put a forward slash in front of your username. That worked for me.

share  improve this answer   

answered Jun 21 '12 at 11:11

beruic

80311 gold badge77 silver badges2727 bronze badges

• Now evince prompts for password by it self. I haven't tried with other programs, but test pages must still be approved manually. – beruic Jun 21 '12 at 11:26
• I tried. The print job is hold for authentication but when I try to authenticate (have tried with both forward slash and backward slash) the job seems to be processed and disappears from the queue but nothing comes out of the printer. – thomas Jun 21 '12 at 15:02
• Did you check that the printer didn't have any unresolved issued that caused your job to just be accepted by the server, but not printed? Like a paper jam, or missing paper or something? – beruic Jun 21 '12 at 18:04
• Yes. That is not the case. Also every time I need to print I start up a virtual box with ubuntu 10.04 and from here I'm able to print just fine. The setup procedure is exactly the same just it doesnt work on my 12.04 64 bit. Authentication and maybe the 64 bit vs. 32 bit is a suspect in my mind. But how do I troubleshoot? any logs that would help? other tests I can perform to see if samba is causing problems? – thomas Jun 22 '12 at 8:23

add a comment

1

Printing via Samba in 12.04 is broken. See: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/967410

share  improve this answer   

answered Jul 3 '12 at 0:22

Nick Hill

1111 bronze badge

• 2
  That bug seems to be related to having an Ubuntu server and Windows clients. This question is about the opposite situation (Windows server, and Ubuntu client), but of course, they could be related. – beruic Jul 16 '12 at 23:46

add a comment

1

In /etc/samba/smb.conf, specify the workgroup:

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP  # Name of the group in AD

Then run /etc/init.d/smb restart.

share  improve this answer   

edited Jan 17 '13 at 0:19

Eliah Kagan

105k2727 gold badges291291 silver badges448448 bronze badges

answered Jan 16 '13 at 23:23

ksanchez

1111 bronze badge

• This solved my problem, except than the smb restart part, I had to manually restart the computer to make it run – Danial Behzadi Oct 30 '13 at 10:14

add a comment

0

This is an old question, but it happened to me with 16.04 LTS, so I think this problem persists and is worth answering.

1. Add the printer via the GUI, do not enter the credentials yet;
2. Edit the configuration file, e.g. sudo vi /etc/cups/printers.conf

3. Navigate to DeviceURI line and edit it so that the URI contained username and password, like this:

   DeviceURI smb://user:my%20password@workgroup/server/usbprinter1
   

4. Keep in mind to UrlEncode the password if it contains unsafe characters; mine contained whitespaces, and the GUI for some reason failed to encode it; this was the entire reason for my problem;

5. Save the file and exit, e.g. Esc :wq;
6. sudo service cups restart to restart the service.

Now you will be able to print the test page and use the printer normally.